Page 3 - Escavator_ed
P. 3

Entwicklungen für die Zukunft

OVERALL SOLUTIONS

Clay Storage Systems                          Clay Storage Systems with                       Schema Längsbagger
                                              Longitudinal Excavator                          Einlagerungssystem
Large-volume storage of ceramic raw           This System is primarily used for the stora-
material is of paramount importance for the   ge of fairlysmall quantities and when diffe-
high requirements placed on the end pro-      rent material components are to be stored.
duct.                                         In this case, walls will separate the material
Due to high fluctuations in the pit material  bay into individual boxes thus also separa-
quality and the growing use ofvarious com-    ting incoming and outgoing material.
ponents,the mixing capacity of mechanical     The storage System consists of a mobile
preparation machinery no longer achieves      and reversible conveyor System. Depending
the required homogeneityof the ceramic        on the control setting, the material will be
body.                                         stored according to various patterns.
Rieter Clay Storage Systems may be used       An excavatorwhich is mobile in longitudinal
as so-called mixing bed Systems. The large    direction is used as a discharge device. The
volume of material is put into störe and      vertical swivel tender has a working range
taken out according to a certain layer pat-   of ±40 degree. The material is discharged
tern thus achieving the highest possible      via a belt conveyor.
mixing effect. Moreover, during this long
storage period an aging process takes         Fig. 1 Longitudinal excavator with discharge
place which - in accordance with the aging    belt
behaviour ofthe individual components -       Fig. 2 Storage System
optimizes the plasticity of the body.         Fig. 3 Excavator tender

These are the indisputable advantages of
Rieter Clay Storage Systems:
1. Virtual independence ofweather conditi-
ons
2. Cross-mixing of large volumes of materi-
al through special storing and emptying
techniques.
3. Disintegration and homogenization ofthe
clay material due to long storage periods.
4. Production is independent of pit and pre-
paration department
5. Takes pressure off the preparation plant
6. Improved, constant quality ofthe final
product
7. Largest and, in terms of volume, the most
economic storage System.

Rieter Clay Storage Systems with longitudi-
nal, transverse and round störe excavators
meet all the customer's requirements.

                                                                                              Baggerleiter

                                                                                                                                           3
   1   2   3   4   5   6   7   8